Scapula fractures: functional anatomy, clinical assessment and management.

Fractures of the scapula are rare injuries, accounting for 3-5% of all shoulder girdle fractures. They are frequently the result of high energy trauma and often present with concurrent and life-threatening injuries to adjacent structures, leading to significant morbidity and mortality. Patients presenting with scapula fractures must receive a thorough and systematic clinical assessment as directed by national trauma guidelines. Appropriate imaging is essential in delineating fracture morphology and should at the very least include anteroposterior, anteroposterior oblique (Grashey) and axillary or scapula 'Y' view of the shoulder. Computed tomography imaging with three-dimensional reconstruction allows better delineation of the fracture morphology and helps with surgical planning. A lack of randomised controlled trials comparing the efficacy of conservative and operative management of scapula fractures has resulted in limited consensus for surgical indications. Nevertheless, most extra-articular fractures can be managed conservatively while intra-articular fractures of the glenoid frequently require surgical fixation.

Assessment of micromotion at the bone-bone interface after coracoid and scapular-spine bone-block augmentation for the reconstruction of critical anterior glenoid bone loss-a biomechanical cadaver study.

BACKGROUND: Glenoid bone loss is among the most important risk factors for recurrent anterior shoulder instability, and a bony reconstruction is recommended in cases of critical bone loss (> 15%). The commonly used surgical techniques, including coracoid transfer, are associated with considerable complications. The aim of this study was to assess the motion at the glenoid-bone-block interface after coracoid and spina-scapula bone-block reconstruction of the anterior glenoid. METHODS: Twelve cadaveric shoulders were tested. A 20% bone defect of the anterior glenoid was created, and the specimens were randomly assigned for glenoid augmentation using a coracoid bone block (n = 6) or a scapular spine bone block (n = 6). The glenoid-bone interface was cyclically loaded for 5000 cycles with a force of 170 N. The micromotion was tracked using an optical measurement system (GOM ARMIS) and was evaluated with the GOM Correlate Pro software. RESULTS: The most dominant motion component was medial irreversible displacement for the spina-scapula (1.87 mm; SD: 1.11 mm) and coracoid bone blocks (0.91 mm; SD: 0.29 mm) (n.s.). The most medial irreversible displacement took place during the first nine cycles. The inferior reversible displacement was significantly greater for spina-scapula bone blocks (0.28 mm, SD: 0.16 mm) compared to coracoid bone blocks (0.06 mm, SD: 0.10 mm) (p = 0.02). CONCLUSIONS: The medial irreversible displacement is the dominant motion component in a bone-block reconstruction after a critical bone loss of the anterior glenoid. The spina-scapula and coracoid bone blocks are comparable in terms of primary stability and extent of motion. Thus, spina-scapula bone blocks may serve as alternatives in bony glenoid reconstruction from a biomechanical point of view.

Glenoid Track Assessment at Imaging in Anterior Shoulder Instability: Rationale and Step-by-Step Guide.

Anterior shoulder dislocation is the most common form of joint instability in humans, usually resulting in soft-tissue injury to the glenohumeral capsuloligamentous and labral structures. Bipolar bone lesions in the form of fractures of the anterior glenoid rim and posterolateral humeral head are often associated with anterior shoulder dislocation and can be a cause or result of recurrent dislocations. Glenoid track assessment is an evolving concept that incorporates the pathomechanics of anterior shoulder instability into its management. Currently widely endorsed by orthopedic surgeons, this concept has ramifications for prognostication, treatment planning, and outcome assessment of anterior shoulder dislocation. The glenoid track is the contact zone between the humeral head and glenoid during shoulder motion from the neutral position to abduction and external rotation. Two key determinants of on-track or off-track status of a Hill-Sachs lesion (HSL) are the glenoid track width (GTW) and Hill-Sachs interval (HSI). If the GTW is less than the HSI, an HSL is off track. If the GTW is greater than the HSI, an HSL is on track. The authors focus on the rationale behind the glenoid track concept and explain stepwise assessment of the glenoid track at CT or MRI. Off-track to on-track conversion is a primary goal in stabilizing the shoulder with anterior instability. The key role that imaging plays in glenoid track assessment warrants radiologists' recognition of this concept along with its challenges and pitfalls and the production of relevant and actionable radiology reports for orthopedic surgeons-to the ultimate benefit of patients. ©RSNA, 2023 Online supplemental material is available for this article. Quiz questions for this article are available through the Online Learning Center.

Assessment of pain, scapulothoracic muscle strength, endurance and scapular dyskinesis in individuals with and without nonspecific chronic neck pain: A cross-sectional study.

INTRODUCTION: This study is aimed to evaluate pain, muscle strength, scapular muscular endurance and scapular kinesis in individuals with Nonspecific Chronic Neck Pain and to compare them with asymptomatic individuals. In addition, to investigate the effect of mechanical changes in the scapular region on neck pain. METHOD: 40 individuals who applied to Kirikkale University Faculty of Medicine Hospital Physical Therapy and Rehabilitation Center and diagnosed with NSCNP and 40 asymptomatic individuals for the control group were included the study. Pain was evaluated with Visual Analogue Scale, pain threshold and pain tolerance with algometer, cervical deep flexor group muscle strength with Stabilizer Pressure Biofeedback device, and neck and scapulothoracic muscle strength with Hand Held Dynamometer. Scapular Dyskinesia Test, Scapular Depression Test and Lateral Scapular Slide Test were used to evaluate scapular kinesis. A timer was used to evaluate scapular muscular endurance. RESULT: Pain threshold and pain tolerance values of the NSCNP group were lower (p < 0.05). Muscle strength around neck and scapulothoracic region of the NSCNP group were lower than the asymptomatic individuals (p < 0.05). NSCNP group had more scapular dyskinesia (p < 0.05). Scapular muscular endurance values of the NSCNP group were lower (p < 0.05). CONCLUSION: As a result, pain threshold and pain tolerance decreased, muscle strength of the neck region and the scapular region decreased, scapular endurance values decreased and the incidence of scapular dyskinesia increased in the individuals with NSCNP compared to the asymptomatic individuals. It is thought that our study will provide a different perspective in the evaluation of neck pain and including the scapular region to the evaluations.

Scapulohumeral rhythm in shoulders with reverse shoulder arthroplasty measured with a new portable three-dimensional scapular kinematics assessment system.

BACKGROUND: Reverse shoulder arthroplasty (RSA) is a valid and increasingly popular treatment option in eccentric arthrosis and cuff arthropathy. We know that the deltoid is the motor of RSA. However, the role of scapular motion has been poorly documented in the literature. The aim of our study is to analyze and quantify the role of the scapular contribution in the functional outcome of patients undergoing RSA. MATERIALS AND METHODS: Fourteen patients who underwent primary RSA were included in the study. In all cases, a reverse prosthesis with lateralizing stem was implanted. All patients underwent clinical examination, video recording, and motion analysis. X-ray and postoperative CT examinations were collected to evaluate positioning and any loosening. ShowMotion (NCS Lab srl, Modena, Italy) 3D kinematic tracking system was used to evaluate and measure the scapular motion in 3 planes. RESULTS: All patients show substantial amount of posterior tilting and lateral rotation starting at 30° in forward elevation. A further difference is the anticipation of the retraction during the range of motion in the RSA side. The contribution of scapular motion in the RSA shoulder was greater than in the healthy shoulder. In patients with bilateral RSA, the contribution of scapular motion was higher in tilting and lateral rotation in the worse shoulder side in terms of range of motion. This means that to compensate for the loss of glenohumeral motion in RSA, more scapula-thoracic motion is needed to obtain the same thoraco-humeral elevation angle. CONCLUSIONS: In the light of what has been measured, the post-RSA scapular kinematics has typical characteristics that must be achieved in order to obtain a good functional outcome. We can conclude that on the RSA side, the patients anticipate upward rotation both in flexion and abduction. The contribution of the upward rotation to elevation in the RSA group is therefore more significant. In addition to this, to facilitate elevation movements, there is an anticipation of the scapular retraction and a more prominent tilt resulting in different scapular kinematics. The analysis of scapular motion could be useful in the postoperative follow-up of patients undergoing RSA surgery and improve adaptative physiotherapy protocols. It potentially can even be included in future arthroplasty planning systems.

Risk assessment of dorsal scapular nerve injury in the medial scapular area associated with upper extremity position: An ultrasonographic study.

INTRODUCTION/AIMS: Injuries to the dorsal scapular nerve (DSN) in the interscapular region are relatively uncommon. Physicians may therefore underestimate the risk of damage to the DSN during procedures. The aim of this study was to identify the topographic position of the DSN in the interscapular region and to identify injection positions for the upper extremities that minimize the risk of damage to the DSN during procedures. METHODS: The positional relationships between the DSN and scapula were quantified by ultrasonography in 46 healthy volunteers. The distances between the medial scapular line and DSN and the DSN depths from the surface in Zones 1 (the superior angle), 2 (the scapular spine), and 3 (between the scapular spine and inferior angle) were measured in the anatomical and contralateral shoulder touch positions (positions 1 and 2, respectively). RESULTS: The DSN was located further away from the medial border of the scapula and closer to the skin in position 2 than in position 1. The horizontal distance of the DSN in Zone 2 differed significantly between the two positions (0.85 ± 0.38 vs 1.23 ± 0.38, P < .001). The results suggest a safe area as just medial to the medial scapular border in Zone 2 in position 2. The safety margin should be considered at least 1.5 cm medial to the medial border of the scapula in Zone 3 in position 1. DISCUSSION: Performing invasive procedures in the interscapular region, appropriate individualized positioning may reduce the risk of DSN injury.

Assessment of three-dimensional rotation of the shoulder complex and scapulohumeral rhythm during sagittal movement.

BACKGROUND: Due to the influence of spinal and respiratory movements, it is difficult to accurately measure the range of motion of each joint. OBJECTIVE: To conduct a three-dimensional (3D) measurement of each joint in the shoulder complex in different postures in the sagittal plane of the upper extremity. METHODS: Thirteen healthy adults with no history of shoulder surgery for trauma or chronic pain were enrolled in the present study. The computed tomography (CT) imaging data of the shoulder complex were acquired in four postures via the reconstruction and alignment of 3D images. The angles of the postural changes were measured, and rotation vectors were used for descriptions and statistical analyses. RESULTS: There was a statistical difference in the rotation angles between the dominant and non-dominant sides of the sternoclavicular joint when the posture changed from a resting position to a posterior inferior position. During the postural change from a resting position to a horizontal position, the regression coefficient (ß) of the humerothoracic joint to the sternoclavicular joint was 0.191, and the ß of the humerothoracic joint to the glenohumeral joint was 0.621. During the postural change from the horizontal position to the rear upper position, the ß of the humerothoracic joint to the sternoclavicular joint was 0.316, and the ß of the humerothoracic joint to the glenohumeral joint was 0.845. During the postural change from the resting position to the rear lower position, the ß of the humerothoracic joint to the glenohumeral joint was 0.991. CONCLUSION: The application of the image alignment technique enabled the direct and accurate measurement of the bony structures of the shoulder joint. The helical approach accurately described the scapulohumeral rhythm during 3D motion. There was a scapulohumeral rhythm of the shoulder complex during 3D composite sagittal movement, with different ratios for different joints and postures.

Assessment of approaches to estimate scapular orientation in children with brachial plexus birth injury.

BACKGROUND: Challenges in measuring dynamic scapular orientation limit assessment of scapulothoracic and glenohumeral contributions to shoulder function in children with brachial plexus birth injury (BPBI). Double calibration acromion marker cluster (D-AMC) and linear model approaches have been validated to estimate scapular motion in healthy adults, but neither has been evaluated in BPBI. RESEARCH QUESTION: Are the linear model and D-AMC approaches able to accurately estimate scapular orientation in children with BPBI at functional arm postures? METHODS: Seventeen children with BPBI positioned their affected limbs in 11 static positions while their segment orientations were measured with motion capture. Linear model and D-AMC estimates of scapular orientation were compared against palpation at six of the static positions with functional relevance to BPBI using a three-way repeat measures ANOVA and a comparison of root mean square errors (RMSE) against literature AMC values for healthy adults. RESULTS: The D-AMC was similar to palpation across all positions and scapular axes while the linear model differed from palpation in a few instances. RMSEs of the D-AMC (3.7-14.8°) and particularly the linear model (4.6-24.8°) were generally at or beyond the upper range of past AMC analyses on healthy adults (1.6-14.2°), especially for more complex, multiplanar arm postures. Despite the D-AMC outperforming the linear model, this approach still produced clinically meaningful (>10°) errors for roughly (12.7-22.5%) of subjects. SIGNIFICANCE: Current methods for estimating dynamic scapular orientation remain less than ideal for BPBI. Use of the D-AMC may be appropriate to gain broad insights into general dynamic scapulothoracic and glenohumeral function; however, given their potential for producing clinically meaningful errors, the D-AMC and linear model are not recommended for diagnostic purposes or outcomes assessment on an individual patient basis unless their patient-specific accuracy has been evaluated and confirmed prior to use.

Scapular winging due to rhomboid muscle paralysis: clinical assessment of 4 cases and anatomic study of the dorsal scapular nerve.

BACKGROUND: A rare cause of scapular winging is rhomboid muscle paralysis secondary to dorsal scapular nerve (DSN) neuropathy. This paralysis causes winging of the medial border of the scapula with lateral rotation of its inferior angle. We report a series of 4 clinical cases of isolated DSN compression and the results of a specific rehabilitation protocol. METHODS: A continuous clinical series of 4 patients with isolated rhomboid muscle deficiency was analyzed. Two patients were men and 2 were women, with a mean age of 40 years (range, 33-51 years). Three patients were right-handed and 1 was left-handed. Scapular winging always affected the dominant side. Two patients had occupations involving heavy physical work. The sports practiced involved exertion of the arms (dancing, boxing, gymnastics, muscle strengthening). A specific rehabilitation protocol was offered to the patients. In addition, 6 fresh cadaver dissections were performed to reveal possible DSN compression. Potential areas of compression were identified, in particular when the arm was raised. RESULTS: The 4 patients presented with isolated DSN neuropathy were confirmed by electroneuromyographic testing. Total correction of scapular winging was not obtained in any patient. Three patients experienced residual pain with a neuropathic pain by the questionnaire for a Diagnosis of Neuropathic Pain (DN4) score of 2. The mean Quick-Disabilities of the Arm, Shoulder and Hand (DASH) score after treatment was 31.8 of 100. The mean ASES score was 56.2. Only 1 patient agreed to rehabilitation in a specialized center and underwent follow-up electroneuromyography. Signs of rhomboid muscle denervation were no longer present and distal motor latencies had become normal. In all cadaver dissections, the DSN originated from the C5 nerve root and did not pass through the middle scalene muscle. We identified a site of dynamic compression of the DSN by the upper part of the medial border of the scapula when the arm was raised. DISCUSSION: DSN compression is conventionally attributed to the middle scalene muscle, but it is noteworthy that our study reveals the possibility of dynamic compression of the nerve by the proximal part of the medial border of the scapula, which occurs when the arm elevation is above 90°. CONCLUSION: Our study reveals the possibility of dynamic compression of the DSN by the proximal part of the medial border of the scapula, which occurs when the arm is raised above 90°. In the absence of a surgical solution, conservative treatment is fundamental and requires management in a rehabilitation center with intervention by a multidisciplinary team.

Acromioclavicular, Coracoclavicular and Medial Coracoclavicular Ligaments Assessment in Acromioclavicular Dislocation / Avaliação dos ligamentos acromioclavicular, coracoclaviculares e coracoclavicular medial na luxação acromioclavicular

Abstract Objective To study the anatomy of the medial coracoclavicular ligament and assess the contribution of the acromioclavicular, coracoclavicular and medial coracoclavicular ligaments to the stability of the acromioclavicular joint. Methods Twenty-six shoulders from 16 fresh cadavers were dissected after placement in dorsal recumbency with a 15-cm cushion between the shoulder blades. An extended deltopectoral approach was performed proximally and medially, followed by plane dissection and ligament identification. The acromioclavicular and coracoclavicular distances were measured using points previously marked with a millimeter caliper. Six of these specimens were submitted to a biomechanical study. The acromioclavicular ligament, the coracoclavicular ligament and the medial coracoclavicular ligament were sectioned sequentially, and a cephalic force of 20 N was applied to the lateral clavicle. The acromioclavicular and coracoclavicular distances were measured in each of the ligament section stages. Results The right medial coracoclavicular ligament presented, on average, 48.9 mm in length and 18.3 mm in width. On the left side, its mean length was 48.65 mm, with a mean width of 17.3 mm. Acromioclavicular, coracoclavicular and medial coracoclavicular ligament section resulted in a statistically significant increase in the coracoclavicular distance and posterior scapular displacement. Conclusion The medial coracoclavicular ligament is a true ligamentous structure found in all dissected shoulders. Our results showed that the scapular protraction relaxed the medial coracoclavicular ligament, while scapular retraction tensioned it; in addition, our findings demonstrate that this ligament contributes to the vertical and horizontal stability of the acromioclavicular joint.

Resumo Objetivo Estudar a anatomia do ligamento coracoclavicular medial e avaliar a contribuição do ligamento acromioclavicular, coracoclaviculares e coracoclavicular medial na estabilidade da articulação acromioclavicular. Métodos Foram dissecados 26 ombros de 16 cadáveres frescos, posicionados em decúbito dorso-horizontal, com um coxim de 15 cm de altura entre as escápulas. Realizou-se uma via deltopeitoral estendida proximal e medialmente. Realizou-se dissecção por planos e identificação dos ligamentos. Realizou a medida da distância acromio-clavicular e coracoclavicular usando pontos previamente demarcados com paquímetro milimetrado. Em seis dessas amostras foi realizado estudo biomecânico. Seccionando, nesta ordem, o ligamento acromioclavicular, os coracoclaviculares e o ligamento coracoclavicular medial com uma força cefálica de 20N foi aplicada na clavícula lateral. Foi medida a distância acromio-clavicular e coracoclavicular em cada uma das etapas de secção dos ligamentos. Resultados A média de comprimento do ligamento coracoclavicular medial foi de 48,9mm e a média de largura, de 18,3mm no lado direito. No esquerdo, a média de comprimento foi de 48,65mm e a média da largura, 17,3mm. Após a secção dos ligamentos acromioclaviculares, coracoclaviculares, com a secção do ligamento coracoclavicular medial houve aumento estatisticamente significativo da distância córaco-clavicular e um deslocamento posterior da escápula. Conclusão O ligamento coracoclavicular medial é uma estrutura ligamentar verdadeira, presente em todos os ombros dissecados. Nossos resultados demonstraram que o ligamento coracoclavicular medial encontra-se relaxado com a escápula em protração e tenso com a escápula em retração e segundo nossos resultados participa tanto da estabilidade vertical quanto da estabilidade horizontal da articulação acromioclavicular.

Development and ex-vivo assessment of a novel patient specific guide and instrumentation system for minimally invasive total shoulder arthroplasty.

OBJECTIVE: To develop and assess a novel guidance technique and instrumentation system for minimally invasive short-stemmed total shoulder arthroplasty that will help to reduce the complications associated with traditional open replacement such as poor muscle healing and neurovascular injury. We have answered key questions about the developed system including (1) can novel patient-specific guides be accurately registered and used within a minimally invasive environment?; (2) can accuracy similar to traditional techniques be achieved? METHODS: A novel intra-articular patient-specific guide was developed for use with a new minimally invasive posterior surgical approach that guides bone preparation without requiring muscle resection or joint dislocation. Additionally, a novel set of instruments were developed to enable bone preparation within the minimally invasive environment. The full procedure was evaluated in six cadaveric shoulders, using digitizations to assess accuracy of each step. RESULTS: Patient-specific guide registration accuracy in 3D translation was 2.2±1.2mm (RMSE±1 SD; p = 0.007) for the humeral component and 2.7±0.7mm (p<0.001) for the scapula component. Final implantation accuracy was 2.9±3.0mm (p = 0.066) in translation and 5.7-6.8±2.2-4.0° (0.001

A computer tablet software can quantify the deviation of scapula medial border from the thoracic wall during clinical assessment of scapula dyskinesis.

PURPOSE: Aim of this study is to establish an objective and easily applicable method that will allow clinicians to quantitatively assess scapular dyskinesis during clinical examination using a computer tablet software. Hypothesis is that dyskinetic scapulae present greater motion-deviation from the thoracic wall-compared to the non-dyskinetic ones and that the software will be able to record those differences. METHODS: Twenty-five patients and 19 healthy individuals were clinically evaluated for the presence of dyskinesis or not. According to the clinical diagnosis, the observations were divided into three groups; A. Dyskinetic scapulae with symptoms (n = 25), B. Contralateral non-dyskinetic scapulae without symptoms (n = 25), C. Healthy control scapulae (n = 38). Then, all individuals were tested using a tablet with the PIVOT™ image-based analysis software (PIVOT, Impellia, Pittsburgh, PA, USA). The motion produced by the scapula medial border and inferior angle deviation from the thoracic wall was recorded. RESULTS: The deviation of the medial border and inferior angle of the scapula from the thoracic wall was 24.6 ± 7.3 mm in Group A, 14.7 ± 4.9 mm in Group B, and 12.4 ± 5.2 mm in Group C. The motion recorded in the dyskinetic scapulae group was significantly greater than both the contralateral non-dyskinetic scapulae group (p < 0.01) and the healthy control scapulae group (p < 0.01). CONCLUSION: The PIVOT™ software was efficient to detect significant differences in the motion between dyskinetic and non-dyskinetic scapulae. This system can support the clinical diagnosis of dyskinesis with a numeric value, which not only contributes to scapula dyskinesis grading but also to the evaluation of the progress and efficacy of the applied treatment, thus providing a feedback to the clinician and the patient. LEVEL OF EVIDENCE: IV, laboratory study.

Comparative assessment of the efficiency of various decellularization agents for bone tissue engineering.

Bone regeneration can be possible through grafts or engineered bone replacement when bone defects are larger than the critical size. Decellularized bone extracellular matrix (ECM) is an alternative that is able to accelerate tissue regeneration, while decellularization protocols influence engineered bone quality. The objective of this study was to compare the quality of decellularized bone produced through different methods. Four decellularization methods were employed using (a) sodium lauryl ether sulfate (SLES), (b) sodium dodecyl sulfate (SDS) 0.5%, (c) SDS 1% and (d) trypsin/EDTA. All samples were then washed in triton X-100. DNA quantification, hematoxylin and eosin, and Hoechst staining showed that although DNA was depleted in all scaffolds, treatment with SLES led to a significantly lower DNA content. Glycosaminoglycan quantification, Raman confocal microscopy, alcian blue and PAS staining exhibited higher carbohydrate retention in the scaffolds treated with SLES and SDS 0.5%. Raman spectra, scanning electron microscopy and trichrom Masson staining showed more collagen content in SLES and SDS-treated scaffolds compared to trypsin/EDTA-treated scaffolds. Therefore, although trypsin/EDTA could efficiently decellularize the scaffolds, it washed out the ECM contents. Also, both MTT and attachment tests showed a significantly higher cell viability in SLES-treated scaffolds. Raman spectra revealed that while the first washing procedure did not remove SLES traces in the scaffolds, excessive washing reduced ECM contents. In conclusion, SLES and, to a lesser degree, SDS 0.5% protocols could efficiently preserve ultrastructure and ECM constituents of decellularized bone tissue and can thus be suggested as nontoxic and safe protocols for bone regeneration.

Reliability and Validity of a Clinical Assessment Tool for Measuring Scapular Motion in All 3 Anatomical Planes.

CONTEXT: A single clinical assessment device that can be used to objectively measure scapular motion in each anatomical plane is not currently available. The development of a novel electric goniometer would allow scapular motion in all 3 anatomical planes to be quantified. OBJECTIVE: To investigate the reliability and validity of an electric goniometer for measuring scapular motion in each anatomical plane during upper extremity elevation. DESIGN: Cross-sectional study. SETTING: Laboratory. PATIENTS OR OTHER PARTICIPANTS: Sixty participants (29 women, 31 men; age = 30 ± 14 years, height = 1.73 ± 0.10 m, mass = 75.32 ± 16.90 kg) recruited from the general population. INTERVENTION(S): An electric goniometer was used to record clinical measurements of scapular position at rest and total arc of motion (excursion) during active upper extremity elevation in 2 testing sessions separated by several days. Measurements were recorded independently by 2 examiners. In 1 session, scapular motion was recorded simultaneously using a 14-camera, 3-dimensional optical motion-capture system. MAIN OUTCOME MEASURE(S): Reliability analysis included examination of clinical measurements for scapular position at rest and excursion during each condition. Both the intrarater reliability between testing sessions and the interrater reliability recorded in the same session were assessed using intraclass correlation coefficients (ICCs [2,3]). The criterion validity was examined by comparing the mean excursion values of each condition recorded using the electric goniometer and the 3-dimensional optical motion-capture system. Validity was assessed by evaluating the average difference and root mean square error. RESULTS: The between-sessions intrarater reliability was moderate to good (ICC [2,3] range = 0.628-0.874). The within-session interrater reliability was moderate to excellent (ICC [2,3] range = 0.545-0.912). The average difference between total excursion values recorded using the electric goniometer and the 3-dimensional optical motion-capture system ranged from -7° to 4°, and the root mean square error ranged from 7° to 10°. CONCLUSIONS: The reliability of scapular measurements was best when a standard operating procedure was used. The electric goniometer provided an accurate measurement of scapular excursions in all 3 anatomical planes during upper extremity elevation.

Reliability of assessment methods for scapular dyskinesis in asymptomatic subjects: A systematic review.

OBJECTIVE: The aim of this systematic review was to evaluate the available published evidence on the intra- and inter-rater reliabilities of assessment methods used for identifying and measuring scapular dyskinesis (SD) in asymptomatic subjects. METHODS: A systematic electronic literature search was performed in PubMed, Physiotherapy Evidence Database, Scopus, and the Cochrane Library, and studies on the intra- and inter-rater reliabilities of physical examination tests used for identifying SD in asymptomatic people were identified. Methodological quality of the studies meeting the inclusion criteria was assessed using the Quality Appraisal of Reliability Studies (QAREL) checklist by two reviewers. The overall level of evidence of this systematic review was determined by the Modified Cochrane Back Pain Criteria based on previous research which was modified for reliability studies of the shoulder complex. RESULTS: The literature search generated 388 results, and only 14 articles met the inclusion criteria. In these studies, reliabilities of two qualitative and five quantitative methods for the assessment of SD were analyzed. The QAREL checklist revealed that 12 studies had moderate risk of bias and 2 had high risk of bias. Additionally, none of the studies were of high quality. On the basis of the Modified Cochrane Back Pain Criteria, the overall level of evidence was moderate. Most of the studies including quantitative measurement methods found good to excellent inter- and intra-rater reliability values. Most of the studies including qualitative methods found low-to-moderate intra- and inter-rater reliability values. CONCLUSION: Considering the available published evidence, there is lack of high-quality studies evaluating the inter- and intra-rater reliabilities of qualitative or quantitative methods used for the assessment of SD. There are no qualitative methods with high reliability that are fit for clinical applications. Some quantitative methods with higher reliability are present, but clinicians should be aware of the methodological flaws that studies evaluating these methods suffer from. LEVEL OF EVIDENCE: Level II, Diagnostic study.

Examining assessment methods of scapular motion: Comparing results from planar elevations and functional task performance.

BACKGROUND: Scapular kinematics of breast cancer survivors are most often evaluated during arm elevation. However, known compensations exist during functional task performance. The purpose of this study was to determine if scapular kinematics of breast cancer survivors during arm elevation are related to scapular kinematics during functional task performance. METHODS: Scapular kinematics of 25 non-cancer controls and 25 breast cancer survivors (split by presence of impingement pain) during arm elevation in 3 planes and 3 reaching and lifting functional tasks were measured. Scapular upward rotation and scapulohumeral rhythm (SHR) at 30° increments of arm elevation were calculated. Between-group differences of upward rotation during arm elevation were evaluated with one-way ANOVAs (p < 0.05). The association of upward rotation angle and SHR during arm elevation and functional tasks was tested with Pearson correlations (p < 0.05). FINDINGS: Scapular upward rotation was reduced for the breast cancer survivor with pain at lower levels of arm elevation in each plane by up to 7.1° (p = .014 to 0.049). This is inconsistent with functional task results, in which upward rotation decrements occurred at higher levels of arm elevation. Upward rotation angles and SHR during arm elevation had an overall weak-to-moderate relationship (r = 0.003 to 0.970, p = .001 to 0.048) to values from functional tasks. Arm elevation during sagittal plane elevation demonstrated scapular upward rotation that was most closely associated to upward rotation during functional task performance. INTERPRETATION: Inconsistent relationships suggests that clinical evaluations should adopt basic functional movements for scapular motion assessment to complement simple arm elevations.

Three-Dimensional Zero Echo Time Magnetic Resonance Imaging Versus 3-Dimensional Computed Tomography for Glenoid Bone Assessment.

PURPOSE: To evaluate the 3-dimensional (3D) zero echo time (ZTE) magnetic resonance imaging (MRI) technique and compare it with 3D computed tomography (CT) for the assessment of the glenoid bone. METHODS: ZTE MRI using multiple resolutions and multislice CT were performed in 6 shoulder specimens before and after creation of glenoid defects and in 10 glenohumeral instability patients. Two musculoskeletal radiologists independently generated 3D volume-rendered images of the glenoid en face. Post-processing times and glenoid widths were measured. Inter-modality and inter-rater agreement was assessed. RESULTS: Intraclass correlation coefficients (ICCs) for inter-modality assessment showed almost perfect agreement for both readers, ranging from 0.949 to 0.991 for the ex vivo study and from 0.955 to 0.987 for the in vivo patients. Excellent interobserver agreement was found for both the ex vivo (ICCs ≥ 0.98) and in vivo (ICCs ≥ 0.92) studies. For the ex vivo study, Bland-Altman analyses for CT versus MRI showed a mean difference of 0.6 to 1 mm at 1.0-mm3 MRI resolution, 0.3 to 0.6 mm at 0.8-mm3 MRI resolution, and 0.3 to 0.6 mm at 0.6-mm3 MRI resolution for both readers. For the in vivo study, Bland-Altman analyses for CT versus MRI showed a mean difference of 0.6 to 0.8 mm at 1.0-mm3 MRI resolution, 0.5 to 0.6 mm at 0.8-mm3 MRI resolution, and 0.4 to 0.8 mm at 0.7-mm3 MRI resolution for both readers. Mean post-processing times to generate 3D images of the glenoid ranged from 32 to 46 seconds for CT and from 33 to 64 seconds for ZTE MRI. CONCLUSIONS: Three-dimensional ZTE MRI can potentially be considered as a technique to determine glenoid width and can be readily incorporated into the clinical workflow. LEVEL OF EVIDENCE: Level II, development of diagnostic criteria (consecutive patients with consistently applied reference standard and blinding).

Assessment of surgeon variability in preoperative planning of reverse total shoulder arthroplasty: a quantitative comparison of 49 cases planned by 9 surgeons.

BACKGROUND: Preoperative planning software is gaining utility in reverse total shoulder arthroplasty (RTSA), particularly when addressing pathologic glenoid wear. The purpose of this study was to quantify inter- and intrasurgeon variability in preoperative planning a series of RTSA cases to identify differences in how surgeons consider optimal implant placement. This may help identify opportunities to establish consensus when correlating plan differences with clinical data. METHODS: A total of 49 computed tomography scans from actual RTSA cases were planned for RTSA by 9 fellowship-trained shoulder surgeons using the same platform (Exactech GPS, Exactech Inc., Gainesville, FL, USA). Each case was planned a second time 6-12 weeks later. Variability within and between surgeons was measured for implant selection, version correction, inclination correction, and implant face position. Interclass correlation coefficients, and Pearson and Light's kappa coefficient were used for statistical analysis. RESULTS: There was considerable variation in the frequency of augmented baseplate selection between surgeons and between rounds for the same surgeon. Thresholds for augment use also varied between surgeons. Interclass correlation coefficients for intersurgeon variability ranged from 0.43 for version, 0.42 for inclination, and 0.25 for baseplate type. Pearson coefficients for intrasurgeon variability were 0.34 for version and 0.30 for inclination. Light's kappa coefficient for baseplate type was 0.61. CONCLUSIONS: This study demonstrates substantial variability both between surgeons and between rounds for individual surgeons when planning RTSA. Although average differences between plans were relatively small, there were large differences in specific cases suggesting little consensus on optimal planning parameters and opportunities to establish guidelines based on glenoid pathoanatomy. The correlation of preoperative planning with clinical outcomes will help to establish such guidelines.

Assessment of the Glenoid Morphology Based on Demographic Data in the Turkish Population.

PURPOSE: In this study, our aim was to evaluate the glenoid version, height, and width measurements based on gender, side, age, height, and hand dominance in the Turkish population using computed tomography (CT) images. METHODS: In our study, CT images of 140 patients (62 females and 78 males; mean age: 39.6 years) who had no shoulder complaints were evaluated retrospectively. Glenoid version (GV), AP diameter (width), and SI diameter (height) on both shoulders were measured on the CT images. Correlations between patient gender, side, age, height, and hand dominance and the GV and size were evaluated. RESULTS: The right shoulder had a mean GV of -0.93 ± 7.80 degrees and the left shoulder had a GV of -0.88 ± 6.63 degrees (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (p > 0.05). The mean AP diameter of the glenoid was 26.57 ± 3.02 mm in the right shoulder and 26.33 ± 3.01 mm in the left shoulder (. CONCLUSION: Hand dominance had an effect on the glenoid version, while patient gender, age, and height had an effect on the glenoid size. The glenoid width in the Turkish population was similar to that of the European and American populations, and the glenoid height was similar to that of the Asian population. Our GV values were similar to those of the Asian population and more anteverted compared to the Western population. We believe that our findings will be useful in preoperative planning and in the production of implants for our population.

Glenohumeral stabilizing roles of the scapulohumeral muscles: Implications of muscle geometry.

Dynamic stability provided by muscles is integral for function and integrity of the glenohumeral joint. Although the high degree of inter-individual variation that exists in musculoskeletal geometry is associated with shoulder injuries, there is limited research associating the effects of muscle geometry on the potential stabilizing capacities of shoulder muscles. The purpose of this investigation was to evaluate the stabilizing functions of the scapulohumeral muscles using computational modeling and to quantify the sensitivity of muscle stabilizing roles to changes in muscle geometry. Muscle stability ratios in the superior/inferior and anterior/posterior directions were computed as the ratio between the muscle's shear components relative to compression throughout arm elevation in the scapular plane. Muscle attachment locations on the clavicle, scapula, and humerus were iteratively adjusted using Monte Carlo simulations. Consistent with previous experimental studies, the rotator cuff muscles were identified as the primary stabilizers of the glenohumeral joint; whereas the deltoids and coracobrachialis have a strong potential for superiorly translating the humerus at low elevation angles. Variations in the stability ratios due to altered muscle geometry were muscle- and angle-specific. In general, the highest variation was observed for the subscapularis and deltoids (at low elevation angles), while the remaining rotator cuff muscles largely maintained their capacity to provide compressive stabilizing forces at the glenohumeral joint. Changes in muscle stability ratios may affect dynamic stability of the humerus that could differentially predispose individuals to greater risk for injury.